Security Panel

 

Hi-Secure Panel

Galvanized and painted welded panel for high degree of security is essential
-------------------------------------------------------------------------------------------------------------------------------------

Introduction :

The panel are heavy welded mesh with small rectangular apertures for providing high degree of security with he most discreet visual impact on the environment . Due to the large wire diameter 4mm and the restricted width of mesh 12.7mm x 76.2mm or 20mm x 75mm several panel can be installed one above to other . Weld strength is minimum of 50% o steel strength granteed on every weld . In test performed by specialized police department, the mesh had a delay factor 40X greater then other fence products.

Benefits :

• High security , attractive design ,long lifetime , good see-through vision , durable and easy installation.


• Security barrier against climbers , not allowing foot or hand holds.

Application :

• Prisons


• Airports


• Military


• Boundary


• High security area

Post :

Option1: Fence post made of SHS63.5X63.5X2mm. and 50x50x2m At fencing section every 400mm a plastic fixing pre-assembled the post with a blind threaded insert. Supplied with a clamp bar made of flat steel 40x5mm to be bolted to the post every 400mm as well as bolt M8x40 made of stainless steel for Allen key 5.5 Top of the post covered with a plastic cap. Post welded on base plate. Post with 45 degree crank extension. Post with double (y) crank extension Option 2: 120x100mm K-DAG Aluminum post with 2.60 interval with option of solar light and without solat light supplied with clamp, fixing accessories,nut and bolts

Panels :

made with 5mm/4.5mm dia vertical and horizontal wire and come with barbed at top and welded with rectangular mesh size of 50x200 mm with a special 3d profile for additional reinforcement.

Gate :

Matching gate are available in sigle or double leaf, swing, sliding and tracked in manual operation or automatic.

Finish Options :

Products are hot deep Galvanized to BS EN 1461
Galvanized and powder coated to BS EN 13438
Only powder coating to non standard
Marine coat Coating for application near salt water

Standerd Drawing: :

Standerd Dimension:

Code	Height	Wire THK	Post Size	Center Post	Based Plated	Open	Fold No
HWP65	0.65	4.5mm	50.0x50.0x2mm	2.5mm center	150x50x5mm	55x200	2
HWP100	1.00	4.5mm	50.0x50.0x2mm	2.5mm center	150x50x5mm	55x200	2
HWP145	1.45	4.5mm	50.0x50.0x2mm	2.5mm center	150x50x5mm	55x200	2
HWP175	1.75	4.5mm	63.x63.5x2mm	2.5mm center	150x50x5mm	55x200	3
HWP195	1.95	5.00mm	63.x63.5x2mm	2.5mm center	150x50x5mm	55x200	3
HWP245	2.45	5.00mm	63.x63.5x2mm	2.5mm center	150x50x5mm	55x200	4